| Component |
Type |
Excerpt from Data Sheet |
Download |
| Bourns Circuit Protection |
diode cross reference |
diode, the gate trigger of the TISP83121D and the forward biased reference voltage blocking diode. TypicallyTISP83121D crowbars. Under low level power cross |
 |
| TISP83121D DUAL-GATE UNIDIRECTIONAL OVERVOLTAGE PROTECTOR |
diode cross reference |
of the voltages of the battery, the forward biased conductor diode, the gate trigger of the TISP83121D and the forward biased reference voltage blocking diode. Typically |
|
| STEPPER MOTOR DRIVER |
diode cross reference |
1.1 1.3 0.6 1 1.4 1.6 V V V V I R Clamp Diode Leakage Current V R =50V -1 50 µ A V F Clamp Diode Forward Voltage Sink Diode Source Diode I F =750mA 1 1 1.5 1.5 V V I S |
|
| SRV05-4 |
diode cross reference |
reference Data Line Protection with Bias and Power Supply Isolation Resistor Data Line Protection Using Internal TVS Diode as Reference Applications Information Page 6 |
|
| POWER MANAGEMENT UNIT FOR MICROCONTROLLED BALLAST |
diode cross reference |
OUT ¦INTEGRATED BOOTSTRAP DIODEreference. During operating mode an internal generator provides an accurate voltage reference that can be used to supply up to 30mA |
|
| SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters |
diode cross reference |
380 mVrms) for varactor diodeis greatly improved in crossLocal oscillation buffer output V OSC BUF 320 380 mVrms LA1135, 1135M No. 1272-2/18 Page 3 Reference |
|
| LM1815 Adaptive Variable Reluctance Sensor Amplifier |
diode cross reference |
zero crossreference signal is pro- cessed (delayed) externally and returned to the LM1815. A Logic input is then able to select either the timing reference |
|
| LM1815 Adaptive Variable Reluctance Sensor Amplifier |
diode cross reference |
? resistor. IC contains 1 k ? in series with diodesignal must first cross the 45mV thresh- old in the positive direction to arm the zero crossing detector, and then cross |
|
| ZMD31020 |
diode cross reference |
reference: internal or external diode •Outputa reference voltage of 0.96 (V DDA –V SSA )As both the signal to be measured as well as the reference voltage |
|
| ZMD31020 |
diode cross reference |
diode 10 VTN input for temperature sensing diode 11 VDDB1 (positive supply for sensor and temperature sensing diode 12 VBP differential sensor signal positive input 13 VSSB |
|
| SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters |
diode cross reference |
diode driver .AM stereo decoder IF output (for LA1136N only) Circuit preventing incorrect seek operation Features .Excellent cross modulation characteristic: Meets the |
|
| RGB HIGH VOLTAGE VIDEO AMPLIFIER |
diode cross reference |
Pin 7 is internally protected against CRT arc discharges by a diodereference, A PMOS transistor providing a copy of the cath- ode current, A protection diode against |
|
| RGB HIGH VOLTAGE VIDEO AMPLIFIER |
diode cross reference |
Pin 7 is internally protected against CRT arc discharges by a diodereference, A PMOS transistor providing a copy of the cath- ode current, A protection diode against |
|
| SY87724L 9/25/01 |
diode cross reference |
TIA PIN DIODE FIBER LASER DIODE FIBER SY889x3 CMU CDR SY87721L AnyRate™ REF_CLK LOCK One REF_OSC SY87729L SY889x2 AnyClock™ LASER DIODE DRIVER Fractional Synthesizer |
|
| SY87724L 9/25/01 |
diode cross reference |
DIODE FIBER LASER DIODE FIBER SY889x3 CMU CDR SY87721L AnyRate™ REF_CLK LOCK One REF_OSC SY87729L SY889x2 AnyClock™ LASER DIODE DRIVER Fractional Synthesizer MUX UP 8 |
|
| DISCONTINUED PRODUCT — FOR REFERENCE ONL Y. |
diode cross reference |
V Clamp Diode Leakage Current I R V R =45 V —1.0 50 µA Clamp Diode Forwardprevent crossREFERENCE ONL Y. Page 1 DISCONTINUED PRODUCT —FOR REFERENCE ONL |
|
| 5 BIT PROGRAMMABLE MULTIPHASE CONTROLLER |
diode cross reference |
and through a diodeCROSS CONDUCTION LOGIC PWM ADAPTIVE ANTI CROSS CONDUCTION CH1 OCP5 BIT VID VOLTAGE POSITIONING, VRM 9.0 s 0.6% INTERNAL REFERENCE |
|
| "+/- 20A Integrated Current Sensor" |
diode cross reference |
as positive. 15K 100 AOP, AON VDD 250 µ A ESD DIODE CROSS SWITCH IMPEDANCE Figureinstrumentation am- plifier to a user-set reference voltage on OCREF, which provides |
|
| C3B03 Schottky Bridge Rectifiers - Surface Mount.cdr |
diode cross reference |
214AB) SCHOTTKY DIODE Operating Temperature: 65°C to 150°C RFE Cross- Max.Average Peak Peak Fwd Surge Max Forward Max. Reverse Package Outline Part Number Reference |
|
| LM1815 Adaptive Variable Reluctance Sensor Amplifier |
diode cross reference |
signal must first cross the 45mV thresh- old in the positive direction to arm the zero crossing detector, and then crosscoil. In normal operation, this timing reference |
|
